磁致伸缩液位计

磁致伸缩液位计

Magnetostriction fluid level gauge

一、产品简介 Product introduction

FY-CZ磁致伸缩液位计是利用韦德曼效应原理（磁致伸缩工作原理），通过现代先进的电子技术手段，精密的计测脉冲波间的时间值，达到测量液体液位的目的。这一方式原理生产的液位计是目前测量液位领域为、简单，性能稳定、可靠、成熟的产品。 尤其是在小量程、常温、常压这类普通环境下更独具优势，是其它测量方法不可比的。FY-CZ磁致伸缩液位计由电子变送器、介面浮子、探杆、显示仪表共四部分组成。前三部份是必须配套选购的。显示仪表根据使用目的确定，可选购亦可不选购，也可用普通电脑代替，安装我司提供的配套软件（或用户订制软件）可实现集中显示（或单独显示）与控制。“探标”杆长度根据用户使用量程定制。在有防爆要求的环境场合使用本仪器，供电回路需配接安全栅。The FY-CZ magnetostriction fluid level gauge is using the basis of Wedeman effect principle (The magnetostriction wong principle), through modern advanced ronic technology means, to measure the time value between the pulse we accurately, so as to achieve the target for measuring the fluid level accurately. The produced fluid level gauge based on such method and principle shall be the just product with the most accurate, simple, stable performance, reliable and mature properties among current industry of fluid level measuring. Especially under the general environments such as with smaller measuring range, normal temperature/ pressure, it may he the unique advantages and incomparable with other measuring methods. FY- CZ magnetostriction fluid level gauge consists of four parts totally, as ronic transducer, floating on medium surface, feeler lever and display instrument separately. The former 3 parts are the must-to-buy as full set. The display instrument shall be determined according to using purpose, either purchasing or not purchasing at all, it can be also substituted with the general PC - with installation of auxiy software (or custom software by user) prod by our company, it can realize the concentrated (or individual) display and control. The length of “feeler lever” shall be determined and customized according to the measuring range of user. While using this instrument in the place with exposure-proof requirement, the matching safety gate should be equipped on the power supply circuit.

二、主要特点 Main features

a、高稳定性、高可靠性、高精度；high stability, high reliability, high accuracy

b、结构精巧，安装简单、方便、免维护；smart structure, simple and convenient installation, maintenance-free.

c、防电磁干扰，防液体波动干扰；romagnetic tamper-proof, fluid fluctuation tamper-proof;

d、：一只传感器同时可测量一种或两种介质液位。Cost-effective: it can use only one sensor to measure the fluid level on two or more mediums and multipoint erage temperature;
e、防腐蚀，耐高温设计，寿命长等。Corrosion-proof, designed for high temperature resistance, with long service life etc.
三、主要性能 Main performance
Measuring range 量程：0~15000mm；
Accuracy 精度：±0.5mm；
Resolution 分辩率：0.1mm；
Environmental temperature 环境温度:：-25℃~70℃；
Process interface 过程接口：3/4″NPT；
Installation interface: 安装接口：法兰连接、螺纹连接；
Power supply 电源：24V DC;
Output signal 输出信号：4~20mA DC+HART协议，两路4-20mA DC+HART协议（双液位使用）
Wong temperature 工作温度：-200℃~160℃

1. 选型表 Sion table

五、订货须知Ordering instructions:

1. 测量范围 Measuring range

2. 工作压力 Wong pressure

3. 连接方式 Connection mode

4. 测量介质 Measuring medium